A fork from a forklift is constrained by two bars (not shown) that fit into each L-shaped appendage on the vertical part of the fork as shown in Figure P11–20. The fork is made of AISI 4130 steel with E = 206:84 GPa, v = 0:30, and a yield strength of 360 MPa. The fork is loaded with 46,189 N/m2 of surface traction on the top surface.

A fork from a forklift is constrained by two bars (not shown) that fit into each L-shaped appendage on the vertical part of the fork as shown in Figure P11–20. The fork is made of AISI 4130 steel with E = 206:84 GPa, v = 0:30, and a yield strength of 360 MPa. The fork is loaded with 46,189 N/m2 of surface traction on the top surface.Questions Pf 18607600 | Mathematics homework helpAn ‘‘Allen’’ wrench is used to loosen a bolt that has a hex-head cross section. As shown in Figure P11–18. This wrench is a 5 mm size and is made of quenched and tempered carbon steel with modulus of elasticity of 200 GPa, Poisson’s ratio of 0.29, and yield strength of 615 MPa. The wrench is used to loosen a rusty bolt. To simulate the fixity aGluten formation lab | Chemistry homework help